The Dos and Don'ts for a Sewage Treatment System

Posted on: 25 July 2016

Share

When building your home, dealing with wastewater is an important aspect that you must take into account. You need a system that will help you get rid of the waste from the building in a hygienic and environment-friendly manner. With a sewage treatment system, you can get rid of the contaminants in wastewater or treated wastewater that is safe to dispose of within the environment. The system relies on chemical, biological, and physical processes to remove the contaminants. Here are some dos and don'ts to help you get it right when building and using the sewage treatment system:

Get a Planning Permit

A planning permit is a document granting permission for the development or use of a particular piece of land. Considering that discharge from your premises can potentially affect the adjacent lands, you need professional approval on the location and type of your system that you should go for. Before the permit is granted, important considerations like the volume of discharge and the level of treatment required have to be taken into account. This will help you avoid penalties resulting from compliance issues with your local authorities.

Have an Alarm

Sewage treatment systems can overflow if due care is not taken to monitor the level of effluent discharged into the system. This is unhygienic. It could also lead to prosecution in cases where the overflowing effluent destroys another person's property. To avoid such incidences, you need an alarm to alert you whenever the sewage system requires discharging.

Don't Use Domestic Chemical Agents Excessively

Dishwasher detergents, washing machine detergents, floor cleaners, bleaches and disinfectants make up a host of chemicals that aren't good for your sewage treatment system. These chemicals affect the growth and sustenance of the microbiology of the system. They alter the system's pH, killing or slowing down the activity of the system's microorganisms. Where possible, avoid using and draining these chemicals into your sewage treatment system. You should also dilute them with a lot of water to reduce their effect before sending them down the drain. Huge amounts of these chemicals will lower your system's efficiency. Other things to avoid using in the system are gardening chemicals, paint, motor oil and excess fat.

Don't Dump Solid Waste

Avoid dumping non-biodegradable solid waste down the sewage system. A good example is polythene wrappers, sanitary towels, condoms and condom wrappings and rags. They interfere with the growth of the system's microorganisms and elevate the chances of blocking the pipework.

For more information, contact a professional in your area or visit a website like http://econocycle.com.au.